(plain steel grating)
Plain steel grating, characterized by its uniform rectangular mesh pattern, serves as a structural cornerstone across industries. Unlike serrated or pressed alternatives, plain style grating provides a flat surface ideal for pedestrian traffic and light vehicular loads. With a typical yield strength of 36,000 PSI and load capacities exceeding 1,000 lbs per square foot, this configuration balances functionality with cost-efficiency.
Borden steel grating variants demonstrate exceptional weight dispersion through their cross-rod welding technique. Key metrics include:
Third-party testing confirms 23% better impact resistance compared to aluminum alternatives in subzero environments.
Vendor | Thickness (in) | Max Span (ft) | Corrosion Warranty | Price/SqFt |
---|---|---|---|---|
SteelGrid Pro | 0.25 | 8 | 15 years | $18.50 |
Borden Industrial | 0.31 | 10 | 20 years | $22.75 |
MetalsUnited | 0.19 | 6 | 10 years | $15.90 |
Custom fabrication parameters include:
A chemical plant recently implemented 1,200 m² of plain steel grating
with 2mm zinc coating, reducing maintenance frequency by 60%.
The Chicago Pedestrian Pathway project utilized 8,500 sheets of Borden steel grating over 14 months. Post-installation data showed:
Proper maintenance extends service life beyond 25 years. Essential protocols:
With 78% of engineering firms specifying plain steel grating for new constructions, its dominance stems from unmatched adaptability. Recent innovations like laser-welded joints and nano-coatings position this solution for continued market leadership through 2030.
(plain steel grating)
A: Plain steel grating is a load-bearing structure made by welding flat steel bars (bearers) and cross rods. It features a simple, non-slip surface and is ideal for industrial platforms, walkways, and drainage covers due to its durability and ventilation properties.
A: Plain style grating refers to a basic design with flat surfaces, while Borden steel grating is a specific type from the Borden brand, often adhering to stricter manufacturing standards. Both offer strength, but Borden may include specialized coatings or load capacities.
A: It’s widely used in factories, warehouses, and construction sites for flooring, stair treads, and safety barriers. Its open design allows airflow and debris passage, making it suitable for wet or corrosive environments.
A: Ensure proper alignment, secure fastening with clips or welding, and verify load requirements. The substrate must be level and corrosion-resistant, and gaps should align with safety regulations to prevent tripping hazards.
A: Regularly remove debris with a brush or pressure washer, and inspect for rust or damage. Apply protective coatings like galvanizing or paint if specified by Borden’s guidelines to prevent corrosion and extend lifespan.